![]() ![]() On the older platforms pin 7 and 8 are both used for K-Line communication. ![]() ![]() The reason why pins 7 and 8 are not shorted together on some cables is because on the newer e90 platform pin 7 is used for K-Line and pin 8 was reassigned for ethernet communication. If no switch is present, then pin 7 and 8 needs to be soldered together. If you are having communication issues with your INPA K+DCAN cable verify that pin 7 and 8 on the OBD side of the cable are shorted together, some cables provide an external switch to connect the two pins. With many softwares the Logger.S solution can also be used instead of an INPA K+DCAN cable. To be able to communicate with the ECU most available software requires an INPA K+DCAN capable USB to OBD2 adapter.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |